| |
 |
 |
|
| |
|
OVERVIEW & FEATURES 
Powerful 450 amp DC mobile diesel driven welder-generator with 5 kVA of 240V/110V AC
auxiliary power. The facility to simultaneously use TWO independent welding stations of 225
amps each, or ONE welding station to 450 amps. Facilities to run cellulose electrodes, MIG and
TIG. Low noise output at full load 63dBA @ 7m from the front panel.
PLUS the :
| • |
UNIPOWER 450TWIN control panel is recessed to protect fittings and controls. |
| • |
UNIPOWER 450TWIN - MIG (F.C.A.W.) Welding can be performed by attaching a suitable wire feed unit. |
| • |
Accessories Available - Trailer, Hour meter, Auto Idle, Welding Lead Kit and Face Shield. |
| • |
TIG Welding can be performed with suitable high frequency accessories to assist starting. |
| • |
Low Noise Level - Sound proofed is fitted as standard. |
| • |
UNIPOWER 450TWIN engine is automatically shut down if water coolant temperature or oil pressure exceeds the preset safety limit (standard feature). |
|
| |
|
| |
| PRODUCT SUMMARY
|
| |
| |
Twin Welder Operation with Independent Controls |
|
Factory production of the Panels |
|
Physical Specification
| Dimensions : |
1300mm (length), 850mm (width), 980mm (height) |
| Volume : |
1.08 cubic metres |
| Weight : |
380 kgs (Dry) |
| Engine : |
Kubota V1505 four cylinder water cooled diesel producing max 33HP (SAE int.) @ 3000 rpm. |
Auxiliary Power
| Voltage : |
220/240 volts AC, 50Hz |
| Output : |
23 Amps (5kw), 2 X 15 Amps weatherproof sockets, ELCB Protected. |
| Rating : |
Continuous at max output |
Optional
| Voltage : |
110 volts AC, 50Hz |
| Output : |
46 Amps (5kw) or One outlet can be 110 volt and the other 240 volt. |
Welding
1. Rating - Max 450 Amps output, 400 Amps @ 30V 100% Duty Cycle, Nema 350 Amps @ 34V 100% Duty Cycle.
2. Amperage Regulation : 30-220A low range, 225-450A high range, 95% pure DC, 5% high frequency (6KHz) component.
3. MIG (F.C.A.W.) Welding, MIG welding can be performed by attaching a suitable wire feed unit.
4. Open Circuit Voltage - 100 volts high (boost), 60 volts normal.
5. Welding Electrode Range - 2.5mm to 11mm.
6. Air Arc Gouging and Cutting 3.2mm to 8mm carbon gouging rods.
|
|
| |
